Breathing A New LifeInto Your Home and Business

6-Step Cleaning Process

Soil that accumulates in carpets typically consists of gritty and abrasive sand and/or dry particulate matter. This soil is insoluble in water, which makes pre-vacuuming before anything else the first step to remove it. This is done with a commercial grade vacuum. Dry soil contributes to the wearing of a carpet by physically cutting and scratching carpet fibers resulting in dull appearance. It is estimated that 79% of the soil in most carpets is dry particulate soil.
The remaining soil in your carpets is composed of oils, greases, starches, etc. This type of soil is acidic by nature and will require an alkaline cleaning detergent to neutralize it. If you understand the science of the pH-scale, you will have an idea of what's happening here. We will pre-spray your carpet with an alkaline pre-spray to emulsify (loosen) soil from the carpet fibers. In laundry terms, compare this step to adding a scoop of cleaning detergent to your laundry load.
We will pre-spot any stubborn spots or food spills on your carpet fibers. In laundry terms, compare this step to "shouting out" any spots or spills on your laundry garments.
We will rake the pre-conditioning into the carpet fibers so that all sides of the carpet fibers are reached by the cleaning agent. We will then allow the cleaning agent ten or fifteen minutes of dwell time for the cleaning agent to take effect. In laundry terms, compare this step to your washers spin cycle, agitating the laundry detergent to begin cleaning your clothing.
Hot Water Extraction / Spin Bonnet Cleaning:
This is the step you will most likely be most familiar with. This is where the major effort our technician, equipment and cleaning agent takes place. This step will fully remove the used solution and suspended soil from the surface, leaving the carpet fiber clean, fresh and residue free. This critical step is the reason all major carpet mills recommend this process because the used solution and soil is completely removed from the carpet fiber. In laundry terms, compare this to the rinse cycle where hot water is used to eliminate used dirty solution and soiled water.
Carpet Grooming:
Lastly, we will groom and reset the nap of your carpet with a carpet rake or brush for a faster drying time. In laundry terms, compare this to the dry cycle.

We Are Licensed, Bonded, and Insured

crouching guy
angies list badge
lady scrubbing floor

Protect Your Investment

    Carpet is often one of the largest investments for a homeowner and must be maintained. We achieve excellent cleaning results with spin-bonnet cleaning and hot-water extraction. Hot-water extraction is commonly marketed as steam cleaning and the end cleaning results are remarkable. The Spin bonnet cleaning method uses an oscillating brush that can have wet, damp or dry pads. There are two different ways, either the carpet s sprayed with a shampoo/solution, or the pads can be soaked in the cleaning solution before placing on the driver brush. The spin bonnet cleaning lifts the dirt and debris off of the carpet. All while leaving your carpets considerably dry. We can remove 90%-95% of water soluble spots and spills, in addition to those unsightly soiled traffic lanes. We also can remove stubborn stains that you thought were permanent, including ink, coffee, pet urine and red stains.

    You can trust our professional service technicians to answer any questions that arise and get the service completed in an efficient manner.

We Serve: Beaverton, Hillsboro, Forest Grove, Tigard, Tualatin, Lake Oswego and All Surrounding Areas